SAT-201 Tester Amortyzatorów

Test bench SAT-201 provides reliable data concerning shock absorber technical condition and is used to perform the following procedures:

• workshop diagnostics of shock absorber faults;

• seller verification of the match between shock absorber performance and its technical characteristics;

• long-duration tests carried out by shock absorber manufacturers;

• study of shock absorber performance run by research and development centers;

• testing by racing teams to select shock absorbers with the required characteristics.

• Diagnostics of shock absorbers equipped with all sorts of mounting mechanisms at different vibration frequencies.

• Possibility to set a shock absorber stroke.

• Two diagnostic modes: automatic and manual.

• Test results can be compared.

• Test results can be saved and printed.

• Intuitive interface.

• Conformity to safety requirements for operation.

• Automatic software update: optional.

Supply voltage, V400

Supply type: Three-phase

Drive power: kW 3.7

Dimensions (L×W×H), mm 970×480×2500

Weight, kg 350

Control of the test bench clamps Air controlled

Air system operating pressure, Bar 6

Operating modes Manual/automatic

Shock absorber testing Size of the tested shock absorber

Maximum, mm 780

Minimum, mm 250

Shock absorber height adjustment Manual

Piston rod stroke adjustment, mm Adjustable in the range from 50 to 150

Mode of adjustment Manual

Permissible load at compression/rebound stroke, kg 1000

Shock absorber frequency

-Maximum, min-1-180

-Minimum, min-1-10

Piston rod speed (at 50 mm stroke)

-Maximum, m/sec 0,447

-Minimum, m/sec 0,026

Shock absorber temperature measuring: Yes

Additional features

Data printout: Yes

Software update: Yes-optional

Internet connection:Wi-Fi (802.11 a/b/g/ac)

Connection of peripherals: 2 x USB 2.0