Motoplat VC-09ST Tester i kalibrator Start/Stop
Motoplat VC-09ST to pierwszy na świecie tester/kalibrator z rynku wtórnego dla alternatorów z serii Valeo ST. Są to alternatory do systemów Start/Stop, które posiadają zdolność odwracalnego działania, służącego również do ładowania akumulatora i uruchamiania silnika.
Categorieën: Sprzęt testowy
Merken: Motoplat
Specyfikacje
add remove
Tot this point, there is only one known instrument that can diagnose and test the reversible alternators of the Valeo ST35 series: the VC-09ST benchtop tester, manufactured by MOTOPLAT. The VC-09ST calibrates the electronic signals to the control box connected to the ECU for a reliable and fast start. The VC-09ST tests all functions of the alternator, such as the parameters.
Depending on the rotor position, the phase shift control system requires that after such an alternator is repaired, the Hall sensors must be correctly positioned. Otherwise, the generator won't have enough power to turn the crankshaft.
On the tester's screen, you can check whether their position is correct or not. An oscilloscope graph of the signal received from the Hall sensor (the square wave) and that of the phases appears on the screen. The accuracy of the Hall sensor's position is indicated based on points where both waves intersect.
If we are dealing with a reversible alternator, it will be 100% efficient as an alternator. For example, if an alternating current generator and its Hall sensors are correctly positioned, it will be 100% efficient as an alternating current motor, such as a starter in this case.
*Tester/calibrator for Valeo ST series alternators
*Tests all functions of the alternator, such as the parameters
*On the tester's screen, you can check whether their position is correct or not
*The VC-09ST calibrates the electronic signals to the control box in combination with the ECU for a reliable and fast start
