TSHB-002 Testeur de cellules de batterie à 12 canaux

The TSHB-002 tester is used during the repair of high-voltage batteries in hybrid and electric vehicles. The tester can determine the capacity of nickel-metal hydride (Ni-Mh) and lithium-ion (Li-ion) batteries of various types: NMC, NCA, LFP. The battery module diagnostic (balancing) process occurs automatically. The tester incorporates protective systems to prevent battery module damage during diagnostics

TSHB-002 stores all measured data during the battery module diagnostic (balancing) process in its memory. These data can then be reviewed and analyzed on a PC using the TesterLogReader software, which you can download and use for free.

Capabilities of the tester TSHB-002:

• Diagnoses high voltage battery modules, determining their capacity.

• Charges sequentially connected cells of batteries that are unbalanced over time.

• Prepares the battery for installation on the car by balancing all modules by voltage.

• Prepares modules for storage, charging them to a certain level.

Advantages:
• 12 independent, galvanically isolated, battery module test (balancing) channels (Ni-Mh or Li-Ion).
• Automatic operating mode.
• Battery module protection against:
- overcharging/discharge;
- overheating;
- incorrect connection (wrong polarity).
• Saving diagnostic results.
• Convenient viewing and analysis of diagnostic results.
• Management and control of the diagnostic process through a touchscreen.
• Free software update.

DATA SHEET

• Supply voltage,230V
• Supply mains typeSingle-phase
• Demanded power (max.), kW1.2
• Dimensions (L x W x H), mm640×320×225
• Weight, kg20
• Operationtouch control
• Display9"
• Battery Diagnostics
• Number of channels for module test12
• Max. channel voltagefor Ni-Mh-->20V andfor Li-Ion4.2V
• Charge rate, Afrom 0.1 up to 4.5
• Discharge rate, Afrom 0.1 up to 5 (max. 50W per channel)

Measured parameters:
- capacity- voltage
- current
- temperature
Measurement accuracy:
-voltage 0,02%
-current 0,5%
Additional features:
Protection from:
- reverse polarity
- short circuit of the connected cable
- overheat
Diagnostics results storage:yes
Software update: optional